Jet Cleaner TANKO-JM
Assembly aid:
Clamping jaws for vise
Art. no. 664 MHJ 800 Z00 S (JM500/800)
7.4.3 Disassembling the Device
NOTE
Risk of damage to the device as a result of improper assembly/disassembly work! Assembly/disassembly of the device which is NOT performed properly can cause damage to the device which puts the functional safety and reliability at risk when re-commissioning. The failure of components or a device malfunction can cause material damage and consequential damages. Use a vise with protective jaws, e.g. plastic or light metal, for clamping. Use only suitable tools which do not damage the surface. For assembly work, adhere to the specified tightening torque values (see section 7.5 Spare Parts and Customer Service). Edge compression in the area of the wrench flats! If workpieces are NOT grasped without play and in a protective manner by the flats during assembly/disassembly, then they are at risk of damage: To avoid causing damage during assembly/disassembly work, use an adjustable wrench with parallel, smooth clamping jaws. Apply the clamping jaws of the adjustable wrench or pliers wrench to the flats without play so that they rest evenly across the surface and loosen or tighten the screwed part.
NOTE
The tools required for assembly/disassembly work are listed in section 7.4.2 Tools and Tightening Torque Values.
7 Maintenance
Translation of the original Operating / Installation Instructions 2016/12
59/90
Powered by FlippingBook