Jet Cleaner TANKO-JM
9 Decommissioning
Once the device has reached the end of its service life, it must be removed from the container, dismantled and disposed of in an environmentally friendly manner. Disposal must be performed in accordance with the respective valid local, national and international regulations.
WARNING
Danger due to improper removal from operation / disposal! A risk of poisoning or irritation exists when using media that is hazardous to health, toxic or hazardous in any other way. There is a risk of death or severe physical injuries. Only an expert should perform the work. Before starting work, observe the working steps of the switch-off procedure (see section 7.2 Switch-off Procedure). Use protective work clothing, protective gloves and safety goggles when carrying out the tasks. In case of any uncertainty or doubt, contact AWH.
Removal
Only experts are permitted to perform the removal from the container and the disassembly of the device for disposal. The section 7.3 Removal contains information on the removal of the devices and its interfaces. The safety instructions in section 7.1 Safety Notes for Maintenance must be observed.
9.1 Disposal
CAUTION
Danger of injuries from harmful liquids which are a health hazard! When performing disposal, there is a risk of injury from contact with harmful liquids. There is a risk of minor or moderate injuries. Use personal protective equipment (e.g. protective gloves, safety shoes, safety goggles).
NOTE
The cleaning device is made of stainless steel and plastic. Stainless steel is a valuable raw material and can easily be recycled.
84/90
Translation of the original Operating / Installation Instructions 2016/12
9 Decommissioning
Powered by FlippingBook