Jet Cleaner TANKO-JM
After removal, the entire device must be properly:
– cleaned (see section 7.4.5 Notes on Cleaning ) and
– disassembled into its assembly units and individual parts (see section 7.4.3 Disassembling the Device ). Unless other arrangements for return or disposal have been made, disassembled components should be turned in for recycling:
– Scrap any parts made of metal
– Recycle any parts made of plastic
If necessary, contact a specialist company to arrange for disposal.
Comply with locally applicable health, safety, disposal and environmental protection regulations.
NOTE
Risk of environmental damage as a result of improper disposal! Cleaning agents, consumables and lubricants must NOT be allowed to enter the groundwater, waterways or sewerage system. There is a risk of environmental damage. Dispose of any cleaning agents, lubricants and consumables (e.g. brushes and cloths) which have been used for cleaning in accordance with the local regulations and in a ccordance with the information in the manufacturer’s safety data sheets. Dispose of packaging materials in an environmentally friendly manner and recycle them.
9 Decommissioning
Translation of the original Operating / Installation Instructions 2016/12
85/90
Powered by FlippingBook