TANKO® S & TANKO® RB_IOM_Rev0

ATEX Spate Cleaner TANKO-EX-S and ATEX Spray Cleaner TANKO-EX-RB

 The preferred installation position for the device is vertical with the cleaning head pointing downwards. Other installation positions are possible.  The device may generate vibrations when cleaning the container. Any vibrations going beyond this must be avoided (see section 7.4.1 Maintenance Intervals ).

The device is NOT suitable for the following applications:

 The device is NOT suitable for private use.

 The device is NOT suitable for use outside of containers.

 Holding the device with your hand during operation is PROHIBITED.

 The device must NOT be immersed in the product of the production process (NOT even partially). This could cause the product to enter into the device. The spray holes may become blocked. The free movement of the actuator may be obstructed.  The device should NOT be used to blow dry air, gases or vapors over containers or over the device itself, as the cleaning agent is used for lubrication of the bearings. The device is intended exclusively for the purpose outlined above. Any other use beyond that described here or alteration of the device without written approval from the manufacturer is considered IMPROPER use. The manufacturer accepts NO liability for damage arising from such use. The operating company is solely responsible for the risk. The device must not be put into operation until it has been assured that all the safety devices are fully functional and the plant in which the device is installed meets the safety requirements of all relevant European directives (e.g. the Machinery Directive).

2.2 Spare Parts, Replacement Parts and Accessories

WARNING

Risk of damage, malfunction or complete failure of the device! Incorrect or faulty spare/replacement parts and accessories put the functional safety and reliability of the device at risk. There is a risk of death or severe physical injury. The failure of components or a device malfunction can cause material damage and consequential damages.

 Use only the manufacturer's original spare parts.

We expressly draw attention to the fact that spare parts and accessories NOT supplied by AWH have NOT been checked or approved by AWH. The installation and/or use of such products could therefore, under certain circumstances, result in changes with negative results to the properties of the device specified by its design and the higher-level plant. AWH is not liable for any damage arising from the use of non-original parts or non-original accessory parts. Standard parts can be obtained from specialist dealers.

Section 7.5.1 Spare Parts includes a list of spare parts.

8/79

Translation-Operating/Installation Instructions 2017/10

2 Safety

Powered by