ATEX Spate Cleaner TANKO-EX-S and ATEX Spray Cleaner TANKO-EX-RB
Device type
Range: - Cleaning radius Operating temperature (permitted): – Cleaning agent
0.75 m (2.5 ft)
1.0 m (3.3 ft)
2.0 m (6.6 ft)
1.5 m (4.9 ft)
max. 180 °C (max. +356 °F)
Ambient temperature (permitted): – Inside the container
+10 °C – max. 180 °C (+50 °F – max. +356 °F)
Operating pressure: – Cleaning agent
< 1 – 7 bar (14.5 – 101.5 psi)
< 1 – 12 bar (14.5 - 174 psi)
< 1 – 10 bar (14.5 – 145 psi)
< 1 – 12 bar (14.5 - 174 psi)
< 1 – 7 bar (14.5 – 101.5 psi)
< 1 – 12 bar (14.5 - 174 psi)
< 1 – 7 bar (14.5 – 101.5 psi)
Optimum pressure: – Cleaning agent
approx. 3 bar (43.5 psi)
0 – 35 l/min
0 -120 l/min
0 -120 l/min
0 -240 l/min
0 -240 l/min
0 -680 l/min
0 -680 l/min
Volume flow rate:
Installation opening min.:
1), 2)
1)
2)
1)
2)
1)
2)
Media connection [MA]:
For the relevant technical data, please refer to the product pages of the current AWH “ Stainless steel cleaning equipment ” catalog.
43 – 69 mm (1.69 – 2.72 in)
60 – 86 mm (2.36 – 3.39 in)
93 -109 mm (3.66 – 4.29 in)
158 -181 mm (6.22 – 7.13 in)
Length [L]"
17 mm (0.67 in)
25 mm (0.98 in)
39 mm (1.54 in)
70 mm (2.76 in)
Head diameter [DK]"
26 – 47 g
81 – 132 g
248 – 323 g
1650 – 1780 g
Weight
90° down / 180° down / 180° up / 270° up / 360°
Spray pattern:
180° down / 180° up / 270° up / 360°
Rotation speed: – with water
1000 – 3000 U/min (depending on the device and pressure):
Installation Position:
Vertically suspended Others possible, although with shorter service life of the plain bearings
see Table 3.3-3 ; Table 3.3-4 and Appendix 2: Corrosion resistance of the materials
Materials:
Dependent on the properties of the container! The noise pressure level can exceed the maximum permissible Exposition value of L EX,8h = 85 dB (A).
Noise pressure level - Outside the container
Table 3.3-1: Operating parameters of the device TANKO-EX-S
1) The installation opening of the threaded and welded connection variants must be 2 mm larger than the head exterior diameter of the device. 2) The installation opening of the clip-on connection variant must be 2 mm larger than the installed connection element.
20/79
Translation-Operating/Installation Instructions 2017/10
3 Construction and Function
Powered by FlippingBook