ATEX Spate Cleaner TANKO-EX-S and ATEX Spray Cleaner TANKO-EX-RB
DANGER
Danger of ignition in potentially explosive atmosphere due to potential differences! When filling and emptying containers with liquids, when recirculating, stirring, mixing and spraying liquids and also when implementing measuring, sampling and cleaning work, the liquids themselves or the interior of the container can be provided with a hazardous charge. Differences in potential (e.g. electrostatic charge) can cause igniting sparks or heat, which can act as an ignition source. There is a risk of death or severe physical injury.
Only clean electrically conductive containers.
Make sure that an electrostatic charge is prevented. Also ensure that all the electrically conductive parts on the device and the container must be grounded for potential equalization to the same potential using grounding cables with a sufficient diameter!
The grounding must always be implemented before commissioning of the device.
Avoid grounding faults (e.g. subsequent grounding of already charged objects or equipment). Do not secure or seal mechanical connections with electrical insulating materials (such as sealing tape, sealant, adhesive, etc.), if it impairs the grounding of the device on the container.
WARNING
Risk of chemical burns and burns when opening the container! The supply line is pressurized. The person may be struck by cleaning jets or come into contact with residual fluid from the supply line and device. There may also be hot vapors in the container. There is a risk of death or severe physical injury.
DO NOT open the container during the cleaning process.
Before starting work, observe the working steps of the switch-off procedure (see section 7.2 Switch-off Procedure).
Before opening the container, observe the cooling and draining time.
Use personal protective equipment (e.g. protective gloves, safety shoes, safety goggles).
50/79
Translation-Operating/Installation Instructions 2017/10
7 Maintenance
Powered by FlippingBook