ATEX Spate Cleaner TANKO-EX-S and ATEX Spray Cleaner TANKO-EX-RB
7.3 Removal
The safety instructions in section 7.1 Safety Instructions for Maintenance must be adhered to before removing the device from the container.
NOTE ON EXPLOSION PROTECTION Work on the device in an explosive atmosphere is PROHIBITED! Non-compliance can result in the loss of explosion protection.
Only allow instructed personnel to work in potentially explosive atmospheres.
The personal protective equipment must satisfy the requirements of explosion protection.
Do not use a tool that could create sparks.
WARNING
Risk of chemical burns and burns when opening the container! The supply line is pressurized. The person may be struck by cleaning jets or come into contact with residual fluid from the supply line and device. There may also be hot vapors in the container. There is a risk of death or severe physical injury.
DO NOT open the container during the cleaning process.
Before starting work, observe the working steps of the switch-off procedure (see section 7.2 Switch-off Procedure).
Before opening the container, observe the cooling and draining time.
Use personal protective equipment (e.g. protective gloves, safety shoes, safety goggles).
CAUTION
Danger due to freely rotating components of the device! When gripping the device, the rotatable mounted spray head can move. There is a risk of minor cuts.
When handling, e.g. unpacking, transportation without packaging, assembly/disassembly and maintenance work, be aware of the freedom of rotation.
Grip the device at the media connection.
Wear protective gloves when working on the device.
53/79
7 Maintenance
Translation-Operating/Installation Instructions 2017/10
Powered by FlippingBook