ATEX Spate Cleaner TANKO-EX-S and ATEX Spray Cleaner TANKO-EX-RB
CAUTION
Risk of a fault as a result of soiling, foreign objects or damage to the device! There is a risk of minor or moderate injuries. Take suitable measures to prevent soiling and foreign bodies from entering via the interfaces of the device. Before starting work, make sure that all necessary tools, auxiliary materials and information are available and observe the instructions for the interfaces. When lifting the device out of the container, maintain a gap from the inner wall of the container and surrounding components (e.g. agitators), to avoid scraping or knocking.
Set the device down on a stable surface after removing it.
7.3.1 Removing the device
WARNING Risk of the device falling accidentally!
The device may strike personnel when falling.
There is a risk of severe physical injury.
Hold the device firmly when installing/removing it.
There must be nobody beneath the device when installing/removing it.
Removing the welded connection
To disassemble the welding version, the downpipe must be removed from the holder together with the device.
1. NOTE The device could fall down!
The device could become damaged by impact effects.
When screwing out the parts, take care to ensure that the housing CAN NOT fall down (e.g. by holding it with one hand).
Disconnect downpipe [DP] at process connection [PA].
2. Lift the downpipe out of the container.
For permanent dismounting, the device can be separated from the downpipe with a suitable procedure. The device will no longer be able to be used afterwards.
54/79
Translation-Operating/Installation Instructions 2017/10
7 Maintenance
Powered by FlippingBook