ATEX Spate Cleaner TANKO-EX-S and ATEX Spray Cleaner TANKO-EX-RB
Removing the threaded connection
1 . NOTE The device could fall down!
The device could become damaged by impact effects.
When screwing out the parts, take care to ensure that the housing CAN NOT fall down (e.g. by holding it with one hand).
Remove thread lock (locking pin, welding points)
Undo the threaded connection to the media supply line (downpipe) using the strap wrench/belt pipe wrench.
2. Unscrew the device from the pipe for the media supply.
Removing the clip-on connection
1. Bend open the wire locking pin with the assembly/disassembly tool for locking pin (clip-on) to one side.
2. NOTE The device could fall down!
The device could become damaged by impact effects.
When screwing out the parts, take care to ensure that the housing CAN NOT fall down (e.g. by holding it with one hand).
Remove the wire locking pin.
3. Detach the device from the pipe for the media supply.
7.4 Maintenance
To ensure the trouble-free operation, high operational safety and long service life of the cleaning device, it is imperative to have it cleaned and maintained at regular intervals.
NOTE ON EXPLOSION PROTECTION Work on the device in an explosive atmosphere is PROHIBITED! Non-compliance can result in the loss of explosion protection.
Only allow instructed personnel to work in potentially explosive atmospheres.
The personal protective equipment must satisfy the requirements of explosion protection.
Do not use a tool that could create sparks.
We recommend that you document the maintenance work in a report.
The safety notes in section 7.1 Safety Instructions for Maintenance must be adhered to when carrying out cleaning, maintenance and repair work.
55/79
7 Maintenance
Translation-Operating/Installation Instructions 2017/10
Powered by FlippingBook