ATEX Spate Cleaner TANKO-EX-S and ATEX Spray Cleaner TANKO-EX-RB
NOTE
Risk of damage to the device as a result of improper assembly/disassembly work! Assembly/disassembly of the device which is NOT performed properly can cause damage to the device which puts the functional safety and reliability at risk when re-commissioning. The failure of components or a device malfunction can cause material damage and consequential damages.
Use only suitable tools which do not damage the surface.
For assembly work, adhere to the specified tightening torque values.
The tightening torques must be selected according to the strength of the material and the thread size of the pipe connection.
NOTE
Damage to the screw connections! Stainless steel screw connections may tend to seize up during assembly as a result of friction caused by high preload forces and high friction values, and can cause problems when tightening and unfastening.
Lubricate the screw connections before assembly.
Define the choice of lubricant very exactly for the application and the requirements (e.g. Klüberpaste UH1 96-402 or UH1 84-201). Adhere to the information in the safety data sheets provided by the lubricant manufacturer.
NOTE
Risk of dirt and foreign bodies in the device! Dirt or foreign bodies can compromise the functional safety and reliability of the device. During assembly, make sure and check that there is no dirt or foreign objects in the device (e.g. small particles, sealing material).
60/79
Translation-Operating/Installation Instructions 2017/10
7 Maintenance
Powered by FlippingBook