DM-0006_Magnetic Trap Strainer IOM_Rev2.0

Step 4 Take your Strainer Element (photo shows a ¼" perforated Element) and slide it up the post of the Magnetic Trap Strainer Element Frame and fit it into the 4" O-ring Retainer.

Step 5 Place the Strainer End Plug onto the Magnetic Trap Strainer Element Frame by sliding it through the End Plug’s hole. The Element rests on the recessed ridge of the End Plug.

Step 6 Insert the end of the Retaining Clip into the Magnetic Trap Strainer Element Frame’s post hole.

4 of 9