DM-0006_Magnetic Trap Strainer IOM_Rev2.0

Once the Retaining Clip is resting in the center bend of the clip, wrap the clip around the Element.

Step 7 Place the Gasket over the end of the Magnetic Trap Strainer Element Frame Assembly and push it to the top of the assembly to rest against the Magnetic Trap’s cap.

Step 8 Place the assembled Magnetic Trap Strainer Assembly into the body of the 4" Angle-Line Strainer with the End Plug and Retaining Clip entering first.

NOTE: We are using a 4" Angle-Line Strainer Body Size with a cut-away as a demonstration piece to show how the Magnetic Trap Strainer Assembly is placed within the Strainer Body.

5 of 9