DM-0006_Magnetic Trap Strainer IOM_Rev3.0

Place the assembled Magnetic Trap Strainer Assembly into the body of the 4" Angle-Line Strainer with the End Plug and Retaining Clip entering first.

NOTE: We are using a 4" Angle-Line Strainer Body Size with a cut-away as a demonstration piece to show how the Magnetic Trap Strainer Assembly is placed within the Strainer Body. Step 9 Ensure there is a tight fit where the Magnetic Trap Strainer Element Frame, Gasket, and Angle-Line Strainer body meet.

Place 4" tri-clamp around the gasket, cap, and strainer body.

Fit the 4" tri-clamp to ensure complete closure. Move the threaded wing nut into place and tighten to 25 in. lb. of torque.

DM-0006_Magnetic Trap Strainer_IOM_Rev3.0.docx

6 of 10