Jet Cleaner TANKO-MX
7.4.2 Tools and Tightening Torque Values Use only proper tools which are required for performing the required work and approved for use. Normal workshop equipment is sufficient for the mechanical work on the device. The following tools are required: – Screwdriver set (slot head) – Hexagon socket wrench (size 2.5 x 100 mm) – Open-end wrench(WAF 14 mm; WAF 41 mm) – Pliers wrench or adjustable wrench with smooth parallel jaws (WAF 14 mm; WAF 41 mm) – Adjustable face wrench (pins Ø 3 mm) – – Torque screwdriver with inserts and accessories – Strap wrench with woven belt (e.g. belt pipe wrench 300 mm - 12 ” ) – Needle nose pliers
Figure 7.4-2: Tools for MX125 All screw connections on the device are tightened to the appropriate tightening torque in the factory in order to ensure the necessary clamping force between the components to be connected, even when the maximum operating forces are applied.
All the relevant tightening torque valued for the screw connections are listed in section 7.5 Spare Parts and Customer Service.
52 / 86
Translation of the original operating/installation instructions 2016/03
7 Maintenance
Powered by FlippingBook