Jet Cleaner TANKO-MX
7. Remove the spur gear (22) together with the collar bushing (05) from the housing (02). 8. Pull the collar bushing (05) from the spur gear (22) with a set of pliers.
9. Remove the planetary carrier (16) assembly with spur gear (19; 20); axle for the planetary gear wheel (17); spiral circlip (32) and collar bushing (03 and 04) from the housing (02). 10. Push the collar bushing (03) out of the planetary carrier (16) with an auxiliary tool (e.g. drift).
11. Lever the spiral circlip (19) out of the internal groove on the planetary carrier (16), by inserting the flat tip of a small screwdriver on the outer notch, and screw it off in a spiral pattern. 12. Pull the axle for the planetary gear wheel (17) from the planetary carrier (16) and the spur gears (19; 20). 13. Push the collar bushings (04) from the spurs (19; 20) with an auxiliary tool (e.g. drift).
7 Maintenance
Translation of the original operating/installation instructions 2016/03
59 / 86
Powered by FlippingBook