Jet Cleaner TANKO-MX
20. Remove the inflow disk (14) from the connection cover (01). 21. Push the collar bushing (03) out of the inflow disk (14) with an auxiliary tool (e.g. drift).
22. NOTE The spur gear (21) is pressed into the housing (02)! The spur gear (21) cannot be removed. Remove the housing (02) together with the spur gear (21) from the vise.
The device is now completely disassembled. The individual parts cannot be checked for soiling or damage and cleaned as necessary (e.g. in an ultrasound bath). Damaged parts and wear parts with signs of wear have to be replaced.
7 Maintenance
Translation of the original operating/installation instructions 2016/03
61 / 86
Powered by FlippingBook