Jet Cleaner TANKO-MX
16. Press the collar bushing (05) into the spur gear (22).
17. NOTE Assembling the planetary gear incorrectly can cause the gear wheels to jam! The gear wheels may become damaged and the cleaning head will not rotate. It must be possible to push the teeth of the spur gear (22) and of spur gears (19; 20) together easily so that they mesh and they must not jam. Push the spur gear (22), together with the collar bushing (05), onto the shaft of the spur gear (18) and into the planetary carrier (16). 18. Press the plain bearing (10) into the bevel gear wheel for the housing (23).
19. Push the bevel gear wheel for the housing (23) with the plain bearing (10) onto the shaft of the spur gear (22). 20. Screw the bevel gear wheel for the housing (23) into the housing (02) and tighten it with an adjustable face wrench (pin Ø 3mm). 21. Insert the spiral circlip (30) into the internal groove on the housing (02) in a spiral pattern and allow it to engage in place.
7 Maintenance
Translation of the original operating/installation instructions 2016/03
67 / 86
Powered by FlippingBook