Jet Cleaner TANKO-MX
11. Push the journal of the driver shaft (25), together with the cylindrical pin (35); bevel gear wheel for the nozzle carrier (26) and spiral circlip (31), into the bushing (09) of the shaft-axle connection (24). 12. Press the collar bushing (08) into the bearing plate (28).
13. Push the bearing plate (28), together with the collar bushing (08), onto the driver shaft (25). 14. Screw the bearing plate (28) into the shaft-axle connection (24) and tighten it with an adjustable face wrench (pin Ø 3mm). 15. Insert the spiral circlip (30) into the internal groove on the shaft-axle connection (24) in a spiral pattern and allow it to engage in place.
16. Slide the sliding disk (11) onto the driver shaft (25). 17. Insert the collar bushing (07) with the collar into the shaft-axle connection (24).
70 / 86
Translation of the original operating/installation instructions 2016/03
7 Maintenance
Powered by FlippingBook