Jet Cleaner TANKO-MX
NOTE
The cleaning device is made of stainless steel and plastic. Stainless steel is a valuable raw material and can easily be recycled.
After removal, the entire device has to be properly: – cleaned (see section 7.4.5 Notes on Cleaning ) and – dismantled into its assembly units and individual parts (see section 7.4.3 Disassembling the Device ). Unless other arrangements for return or disposal have been made, dismantled components should be sent for recycling: – Scrap parts made from metal – Recycle parts made from plastic If necessary, contact a specialist company to arrange disposal. Comply with locally applicable health, safety, disposal and environmental protection regulations.
NOTE
Risk of environmental damage as a result of improper disposal! Cleaning agents, consumables and lubricants must NOT be allowed to enter the groundwater, waterways or sewerage system. Damage to the environment. Dispose of any cleaning agents, lubricants and consumables (e.g. brushes and cloths) which have been used for cleaning in accordance with the local regulations and in accordance with the information in the manufacturer’s safety data sheets. Dispose of packaging materials in an environmentally friendly manner and recycle them.
9 Decommissioning
Translation -Operating/installation instructions 2016/03
81 / 86
Powered by FlippingBook