TD-0001_COP Parts Washers_Technical Datasheet_Rev6.0

CLEAN-OUT-OF-PLACE (COP) PARTS WASHER

10.11 FILL PORTS Selection of the Water and Chemical Fill Port option adds one (1) tri-clamp water fill port and one (1) 0.25” MNPT chemical fill port in the upper sidewall of the tank body. The fill port size is 1.5” TC for tanks with nominal volume ≤ 200 gallons, and 2.0” TC for nominal tank volumes > 200 gallons. NOTE: • Backflow prevention for the water fill port is by others (if required by the water supply).

11 ACCESSORIES

11.1 CHEMICAL PUMP ASSEMBLY, WILDEN P1 The chemical delivery system doses the cleaning chemicals into the tank. If the Conductivity Analyzer option is selected, the analyzer’s output can be tied into the air solenoid valve for dosing and maintaining a chemical concentration. For manual control, the air solenoid valve would be wired to an on/off switch. The below listed components of the assembly are loose shipped for installation by others. • One (1) PVC Suction lance (43”) with foot valve for placement into a 55-gallon drum (drum by others). • One (1) Wilden P1 series air operated diaphragm pump ο Duty: 4 gpm @ 65 psi

ο Instrument air requirement: 6 SCFM @ 80 psi ο Polypropylene body with PTFE diaphragms ο One (1) 0.25” Solenoid valve (120V AC) with filter / regulator for control of the pump. The pneumatic components and piping are made of brass. ο One (1) 304ss wall mounting bracket allowing the pump assembly to be placed near the chemical drum • One (1) Manual bleed valve to aid in priming the pump

Bleed Valve

Check Valve

• One (1) 0.25” Check valve to prevent the siphoning of the cleaning chemicals • One (1) 30 ft., 0.5” Polyethylene tubing for the pump’s suction and discharge lines • One (1) 8 ft., 0.375” Polyethylene tubing for the pump’s bypass/priming line NOTE: • It is recommended to add the Water and Chemical Fill Port option when using the chemical pump for a tie-in point for chemical injection.

Suction Lance with Foot Valve

16

CLEAN-OUT-OF-PLACE (COP) PARTS WASHER TECHNICAL DATASHEET

Powered by