TD-0001_COP Parts Washers_Technical Datasheet_Rev6.0

CLEAN-OUT-OF-PLACE (COP) PARTS WASHER

1 INTRODUCTION

Technical information provided within this document is for Sani-Matic’s Clean-Out-of-Place (COP) Parts Washer Configured Design Offering (CDO) serving the food and beverage industry. Alternative Design Requests (ADR) for variations in construction, options, orientation, or other technical requirements should be directed to the Sani-Matic sales team for custom quoting and engineering. The system details described in Sections 2 through 9 apply to all models and their standard options, which are designated with “(Standard)” in the model key. The selectable product options within the model key are described in Section 10 . Accessories such as chemical pumps and COP Parts Baskets are described in Section 11 . Sani-Matic’s Clean-Out-of-Place (COP) Parts Washers clean food & beverage industry process parts that cannot be cleaned in place and require disassembly for thorough cleaning. Typical process parts cleaned include pipes, hoses, fittings, clamps, gaskets, and valves. 2 APPLICATIONS

Fittings, Gaskets & Clamps

Miscellaneous Parts

Hoses & Pipes

Valves

3 CONSTRUCTION

3.1 CERTIFICATIONS AND CLASSIFICATIONS • Electrical Area Classification: Non-hazardous • Electrical Certification: UL 508A • Seismic Design: None • Industry Standards: Authorized to provide Canadian Registration Numbers (CRN), helps meet FSMA and HACCP Sanitation Preventive Controls • System Certifications: None 3.2 STRUCTURAL FRAMING • Material: 304ss round tubing • Surface Finish: Bead blasted • Fully welded, single-piece construction • Feet for locating the equipment at a fixed location in the facility. The feet are adjustable allowing the equipment to be leveled on uneven or sloped surfaces. Models with lengths 8’ and less have four (4) feet, while models 10’ and longer have six (6) feet.

4

CLEAN-OUT-OF-PLACE (COP) PARTS WASHER TECHNICAL DATASHEET

Powered by