9. Documentation
One (1) hard copy and (1) electronic copy of the documentation package is provided as standard The documentation is provided in the English language and includes the following information: • Warranty information
• Operation and maintenance manuals • HMI user and maintenance manuals • Recommended Spare Parts (RSP) list
• Mechanical Bill of Materials (BOM) • Component vendor documentation • As-built General Assembly (GA) drawings • As-built Process and Instrumentation Diagram (P&ID) • As-built electrical drawings
10. Product Options
10.1 System Configuration The Left-Handed configuration will provide a mirror image of what is shown in the front view of Section 5 Physical Size and Layout The HMI interface and controls will be located on the left side of the machine and the door will hinge open from the right side of the machine 10.2 Chamber Insulation In addition to the insulated door / front face, the Side Wall Chamber Insulation option adds ceramic fiber insulation to back, left side, and right side of the chamber The insulation is encapsulated in a fully welded stainless steel sheathing This insulates the chamber, helping to maintain interior temperatures by reducing any fluctuations from ambient temperatures and increases worker safety 10.3 Dryer System The Dryer System option allows for heated drying and cooling phases to be included at the end of the cleaning cycle These phases significantly reduce the amount of residual final rinse water on the parts and rack within the chamber before unloading the rack onto a transfer cart The Dryer System & HEPA Filtration option adds a HEPA filter to the Dryer System option The HEPA filter can remove dust, pollen, mold, bacteria, and any airborne particles with a size of 03 microns from the dryer air, preventing any opportunities for contamination during the drying process Air is pulled from the surrounding area and discharged through the exhaust duct on the top of the cabinet It is recommended
that this exhaust air be ducted to an HVAC system or external environment The following components and necessary controls are added to the system: • Dryer System Option − Components ◊ One (1) Centrifugal fan • 400 ACFM at 6" WC • Direct drive • 1 HP TENV Motor • 304 stainless steel construction ◊ One (1) 10-micron fan suction pre-filter ◊ One (1) Inline electric heater • 24 kW • 460V AC, 3PH, 60Hz • High-temperature thermocouple
sanimatic.com 16
TD-0008.3
Powered by FlippingBook