c. Panel Network Settings
Note (1)
Note (2)
Note (4)
Note (3)
Notes The “Panel Network Settings” screen will show the current network configuration and allows for modifying the network settings. The “WAN” tab can be ignored as the DPR HMI panel only has one (1) Ethernet port (LAN). 1. Press the checkbox next to “DHCP Client Enabled” to enable or disable DHCP addressing. 2. To edit any of the network address settings, DHCP must be turned off. Press any of the address text boxes to bring up the on-screen keyboard to edit the value of that setting. 3. Press the “Apply” button to apply any network changes that were made. 4. After making any changes to the network configuration of the DPR HMI panel, the panel may need to be restarted. A message will appear indicating that a reboot is necessary, and the “Reboot” button will be enabled (not grayed out). Press the “Reboot” button to restart the HMI panel.
DM-0013_Digital Process Recorder (DPR)_IOM_Rev4.0
21 of 76
Powered by FlippingBook