1. Overview
a. Introduction
The following is an operation manual for the Digital Process Recorder (DPR), powered by SaniTrend® Cloud.
This manual focuses on the DPR’s HMI operation, as well as the SaniTrend® Cloud online user interface operation and screen navigation. Refer to specific electrical and/or programming documents for more information on the wiring and programming (if applicable) of associated DPR hardware and software elements.
Both DPR Charts and DPR Reports product tiers of the software are covered in this manual. Visit our website for the latest product information:
https://sanimatic.com/digital-process-recorder/
b. Website Access
The SaniTrend® Cloud online portal where DPR data is reviewed and stored can be accessed at the following link:
https://sanimatic-prod1.cloud.thingworx.com/Thingworx/FormLogin/SaniTrend
The recommended internet browser and screen requirements are below:
Internet Browser - Chrome (preferred) Screen Size - 1920 x 1080 (preferred)
• •
c. Firewall Requirements The DPR requires internet access to work with the SaniTrend® Cloud portal. If there is a firewall in place, the DPR requires outgoing TCP access on port 443 to https://sanimatic- prod1.cloud.thingworx.com for data transfer to the cloud platform. The UDP 123 port shall be set to open, to allow the clock synchronization from time.windows.com through the SNTP protocol. If remote support for the DPR HMI panel is desired, please refer to the firewall quick reference guide for FactoryTalk Remote Access at the following link: https://www.rockwellautomation.com/en-in/docs/factorytalk-remote-access/current/factorytalk-remote-access-help-ditamap/quick-reference-guide/what-are-the- main-protocol-settings-.html
DM-0013_Digital Process Recorder (DPR)_IOM_Rev4.0
5 of 76
Powered by FlippingBook