12.1.2 Part 3D Modeling - Design Cost (per Part) This service is for generating a 3D model of each unique customer part to be cleaned on a rack The modeling will allow specific design elements to be incorporated into the rack and allow for repeatable part placement on the rack The modeling will take place at Sani-Matic’s facility This requires customers to provide drawings or to ship process parts Shipping the components to and from Sani-Matic will be at the customer’s expense Identical process parts will only require one (1) modeling fee
NOTE: • If 3D model files are available or Sani-Matic already has the applicable part model, this design cost is waived • Parts either need to be shipped to Sani-Matic’s facility (preferred) or detailed drawings and pictures sent electronically If only pictures with rough dimensions are received, rack fit-up for the parts is not ensured by Sani-Matic
12.1.3 Part 3D Modeling - Trip (Budgetary) This service sends a Sani-Matic design engineer to the customer location to perform the 3D modeling described in Section 12.1.2 Part 3D Modeling - Design Cost (per Part) Modeling at the customer’s facility reduces the amount of time that the parts are unavailable for production Generally, three components can be modeled per hour The number of components that can be modeled in the allotted time varies dependent on component complexity and availability to the technician This option is a budgetary value based on the provision of one (1) Sani-Matic design engineer for two (2) ten-hour days, sixteen (16) hours of travel, and four (4) days of expenses
NOTE: • If selecting this accessory, the per part cost described in Section 12.1.2 Part 3D Modeling – Design Cost (per Part) does not apply • The final invoice is based on the actual hours and expenses with the expenses invoiced at Sani-Matic's cost
12.2 System Additions 12.2.1 Passivation - System
Sani-Matic will provide factory passivation of all solution contact surfaces on the system The citric acid passivation is performed and documented per Sani-Matic’s standard procedure (SOP-MA005), which adheres to ASTM A967-05 requirements A certificate of passivation (SMI-LOG-007) is provided upon completion
sanimatic.com 30
TD-0003.5
Powered by FlippingBook