ATEX Spate Cleaner TANKO-EX-S and ATEX Spray Cleaner TANKO-EX-RB
NOTE When tightening and loosening the device, the ball bearings can be damaged! The rotation behavior can be disturbed! Do NOT place the strap wrench/belt pipe wrench in the ball bearings area. 2. Tighten the threaded device connection to the pipe with the strap wrench / belt wrench. The tightening torque value for the threaded connections between the connection cover and pipe depends on the material of the pipe for the media supply. 3. Screw connections are to be prevented from working loose by using appropriate measures (2 weld points between the device and supply line, bolting of the device to the supply line).
Installation clip-on connection
Figure 5.2-4: Dimensions clip-on
The bore holes for the clip-on locks are manufactured for delivery in such a way that the following wire diameters can be used for the cleaning devices:
Wire diameter [mm]
d [mm]
h1 [mm]
h2 [mm]
Cleaning device
TANKO-EX-S20
2.0
2.2
7
3
TANKO-EX-S30
2.0
2.2
10.5
5
TANKO-EX-S40
3.6 – 3.8
4.0
20
10
TANKO-EX-S50
4.5 – 5.2
5.5
19/35.2
10/24.2
TANKO-EX-RB30
2.0
3.0
17
8
TANKO-EX-RB40
2.4
3.0
17
8
TANKO-EX-RB64
3.6 – 3.8
4.0
21
10
TANKO-EX-RB90
4.5 – 5.2
5.5
28
13
Table 5.2-2: Dimensions clip-on
The article no. for the wire locking pins are listed in section 7.5.1 Spare Parts.
38/79
Translation-Operating/Installation Instructions 2017/10
5 Installation
Powered by FlippingBook