Jet Cleaner TANKO-MX
5.2.3 Installing the Device Installation Opening of the Container
The use of the device (mobile or stationary) is the decisive factor for the required size of the installation opening. The specified installation dimensions in Table 3.3-1: Operating parameters of the device are recommended minimum dimensions for the installation opening and for installing the device in the container and removing it from the container in assembled condition. A “ stationary device ” can be installed in different ways depending on the properties of the container and the size and accessibility of the installation opening. – Before installation, the device is fastened to the media connection [MC] at the downpipe [DP] and inserted into the container from the outside via the installation opening. The process connection [PC] of the downpipe [DP] is then fastened to the container or – the device is fastened to the media connection [MC] on an existing downpipe [DP].
WARNING Risk of the device falling accidentally! The device may strike personnel when falling. There is a risk of severe physical injuries. Hold the device firmly when installing/removing it. There must be nobody beneath the device when installing/removing it.
NOTE Risk of dirt and foreign bodies in the device! Functional safety and reliability may be compromised. During installation, make sure and check that there is no dirt or foreign objects in the device (e.g. small particles, sealing material).
30 / 86
Translation of the original operating/installation instructions 2016/03
5 Installation
Powered by FlippingBook