8. Testing
The equipment will be factory tested to confirm its proper operation Included in this are the below testing methods • Confirm that the equipment is complete and conforms to the drawings • Confirm that the safety systems operate correctly (if applicable) • Verify controls are wired properly (if applicable) • Functional testing of the control system (if applicable) • Wet testing of the pump
9. Documentation
The equipment is provided with one (1) hard copy of the documentation package The documentation is provided in the English language and includes the following information • Warranty information • Recommended spare parts (RSP) list • Device settings (if different than the vendor’s standard) • Piping & Instrumentation Diagram (P&ID) and Mechanical Bill of Material (BOM) • General Assembly (GA) drawing
• Electrical panel layout drawing (if applicable) • Electrical schematics drawing (if applicable) • Component manuals (as provided by the vendor)
10. Product Options
10.1 Tank Cover The Hinged Cover option provides operator protection from the wash solutions in the tank, helping to contain vapors in the tank The cover is hinged in the back and opens approximately 80° For 4'- to 8'-length tanks, lift assist cylinders help reduce the effort to open the cover as well as hold it in the open position On 10'- and 12'-length tanks, a counterweighted cover provides the same benefits Both cover types are made of 304ss with weld color removed
NOTE: • This option cannot be used with the Drain Board with Pipe Racks option (see Section 10.2 ) or the End Mounted Drain Table accessory (see Section 11.2 ) when the cover is closed • This option adds height (open cover) and width (cover hinge) to the system dimensions
Hinged Cover with Counterweight
Hinged Cover with Lift Assist Cylinders
sanimatic.com 9
TD-0001.3.0
Powered by FlippingBook